DIY Druzy Necklace

Hello ladies! Wow, you can't imagine how proud we are to present our first online store! What does that mean? It means you can buy ALL the materials shown in the photo below from the comfort of your own home—that is, from your computers, mobile phones, or tablets.

For those who haven't heard yet: We have a new online store! We're now offering FREE Priority Mail shipping on orders of $50 or more. This offer applies throughout Puerto Rico and the United States. If you're outside the United States or Puerto Rico, we also offer free shipping, but only on orders of $250 or more.

This is just the beginning; we still have a lot of work ahead of us, but we hope you will enjoy the fruit of so much love and effort.

Below are the step-by-step instructions for the DIY Druzy Necklace (DIY = Do It Yourself).

Materials:

1- Gold-Filled Chain - 2 feet.

2- 2mm Gold-Filled Jump Rings : 3 pcs

3- 6mm Gold Filled Jump Rings : 1pcs.

4- Druzy Connector - 1 piece

5- "Spring Ring" Closure - 1 piece

6- Pliers : 2 Needle Nosed Pliers or 1 Needle Nosed Plier and 1 Round Nosed Plier

NOTE: You can click on any of the materials above and it will take you to the page where you can buy them :)

First Step:

We start by cutting the chain into two pieces of 12" each, or whatever length you want your necklace to be.

Second Step:

Then, using pliers, we open the 2mm jump ring to join the druzy connector to one of the chains.

Third Step:

We repeat the same step but on the other side of the connector.

Fourth Step:

Once both ends of the chains are attached to the connector, we'll begin with the clasp. First, open the 2mm jump ring and pass it between the chain and the clasp.

Fifth Step:

Finally, we open the 6mm ring and close it after passing it through the chain.

And with that, we're finished.

We hope you have fun making your necklaces!